We earn a commission from qualifying purchases at no extra cost to you. This never influences our rankings.
Independent rankings, no fluff

Best 0.8 GPF Toilets (Ultra High Efficiency)

A 0.8 GPF toilet uses just 0.8 gallons per flush, half the 1.6 gallon federal maximum and well under the 1.28 gallon EPA WaterSense ceiling, which makes it the lowest-water flush you can buy. Almost every true 0.8 gallon flush is the light or partial side of a dual flush toilet, paired with a stronger 1.0 to 1.28 gallon flush for solids, because 0.8 gallons alone rarely clears solid waste in one push. We ranked the best 0.8 GPF toilets using independent MaP flush-test gram scores, published gallons-per-flush volumes, EPA WaterSense certification, trapway and glaze design, and the patterns across thousands of aggregated owner reviews, so you can reach the lowest possible water bill without ever double flushing.

Why Trust Best Flushing Toilets

  • Flushing power and MaP flush-test scores
  • Water efficiency (GPF and EPA WaterSense)
  • Aggregated owner reviews
  • Clog resistance and trapway design
  • Brand reliability and warranty

Research updated June 2026.

Quick Answer

The best 0.8 GPF toilet is the TOTO Aquia IV. Its dual flush sips just 0.8 gallons on the light flush for liquids, then switches to a 1.28 gallon Dynamax Tornado full flush that posts a perfect 1,000 gram MaP score to clear solids in one push. That pairing gives the lowest household water average without the double flushing a single 0.8 gallon flush would force. The Swiss Madison St. Tropez is the best modern value pick.

A 0.8 GPF toilet is defined by its lightest flush: 0.8 gallons of water released to clear the bowl. That is the lowest flush volume sold in North America, half the 1.6 gallon federal maximum that has applied to new toilets since the 1990s, and well below the 1.28 gallon EPA WaterSense ceiling. Almost no toilet flushes solids with 0.8 gallons every time, because that little water cannot reliably move a solid load through the trap. Instead, 0.8 gallons is the partial, or light, flush of a dual flush toilet: you press the small button for liquids and paper, and the larger button for solids, where a 1.0 to 1.28 gallon flush takes over. Because the great majority of daily uses are liquid only, that 0.8 gallon light flush pulls a household's yearly water average lower than any single-volume toilet, even a 1.28 gallon WaterSense model.

We do not run our own flush trials. Instead we compare published manufacturer specifications, independent MaP (Maximum Performance) flush-test gram scores, EPA WaterSense certification, the flush volume in gallons per flush, the trapway and bowl glaze, and the patterns across thousands of verified owner reviews. For 0.8 GPF toilets specifically we weighted the full-flush MaP score and the strength of the dual flush mechanism above the headline 0.8 gallon figure, because the trap people fall into is buying for the lowest number on the box. A toilet whose light flush sips 0.8 gallons but whose full flush is weak forces a second push on solids, and two flushes use far more water than the 0.8 gallon light flush ever saves. Every model here pairs a genuine low light flush with a strong full flush that clears solids cleanly. For the broadest performance-first ranking across every toilet type, see our pillar guide to the best flushing toilets.

A 0.8 GPF rating is almost always a dual flush light flush, not a single-volume toilet. When a listing advertises 0.8 GPF, read it as the small button on a dual flush model, paired with a 1.0 to 1.28 gallon full flush for solids. The 0.8 gallon light flush is what lowers your yearly average, but the full flush is what actually clears the bowl, so judge the full-flush MaP score first. A toilet with a 0.8 gallon light flush and a strong 800 to 1,000 gram full flush, like the TOTO Aquia IV, locks in the savings, while a weak full flush forces double flushing that erases them.

How we research and rank 0.8 GPF toilets

Every pick here had to offer a genuine 0.8 gallon class light flush while still clearing solids in a single push on its full flush. We required a strong full-flush MaP score, with our leading picks at 800 to 1,000 grams and none rated for weak clearing, because a 0.8 GPF toilet that double flushes on solids defeats the entire purpose. We confirmed EPA WaterSense certification, since dual flush models qualify on their effective flush volume, which the program calculates by weighting the light and full flushes, and the label means an independent body has verified both the water use and the flush performance. We looked hard at the flush mechanism, glaze and trapway, because a dual flush valve and a glazed passage resist the leaks and clogs that quietly waste more water than any flush volume saves. We weighted independent MaP data, WaterSense status and aggregated owner reports over any marketing language, and we do not accept payment for placement.

ToiletBest ForMaPGPFRatingCheck Price
TOTO Aquia IVBest overall 0.8 GPF1000 g0.8 / 1.284.7Check price
Swiss Madison St. TropezBest modern value800 g0.8 / 1.284.4Check price
Woodbridge T-0019Best designer one-piece800 g0.8 / 1.284.6Check price
TOTO Vespin IIBest skirted two-piece800 g0.9 / 1.284.6Check price
Kohler Santa RosaBest compact one-piece800 g0.8 / 1.284.5Check price
American Standard H2OptionBest value two-piece1000 g0.92 / 1.284.5Check price
Gerber AvalancheBest contractor value800 g0.8 / 1.284.3Check price
TOTO Aquia IV 1GBest near-1-gallon average1000 g0.8 / 1.04.6Check price

The 8 best 0.8 GPF toilets, reviewed

TOTO Aquia IV toilet
1
Best Overall

TOTO Aquia IV

4.7 Best low-water average

The Aquia IV is the 0.8 GPF toilet most buyers should start with, because its 0.8 gallon light flush is among the lowest in a model whose full flush still posts a perfect 1,000 gram MaP score, so it pulls your yearly average to the floor without ever forcing a second push on solids.

Flush TypeDynamax Tornado dual flush
GPF0.8 partial / 1.28 full
MaP Score1,000 g full flush
Bowl HeightComfort height, elongated
Warranty1-year limited
Best For
  • The lowest yearly water average
  • Buyers wanting a clean skirted body
  • Liquid-heavy household use
Not Ideal For
  • Buyers who dislike top buttons
  • Strict budgets

The Aquia IV pairs a very low 0.8 gallon partial flush for liquids with a 1.28 gallon full flush for solids, and because most uses in a normal day are liquid only, that 0.8 gallon light flush drives the household average well below any single-volume toilet. The full flush reaches a perfect 1,000 gram MaP score using TOTO's Dynamax Tornado swirl, which feeds water through twin nozzles to scour the bowl rather than dump it down the front, so solids clear cleanly without pressing the button twice. The light flush is what lowers the meter reading, and the strong full flush is what makes the savings real.

The skirted two-piece body has smooth sides with no contoured trapway bumps to scrub, and the CeFiONtect glaze keeps the bowl cleaner between wipes. Owner reviews run deep and consistently praise the strong rinse and quiet refill, with the usual note that the top push-button takes guests and children a moment to learn. The other downside is a price above value single-flush picks. For a buyer focused on the lowest possible water average, the Aquia IV is the default 0.8 GPF choice, and it also leads our roundup of the best water saving toilets of 2026.

Expert Take

If you want a 0.8 GPF toilet and you are unsure where to start, buy the Aquia IV. The 0.8 gallon light flush is as low as the category goes, and the perfect 1,000 gram Tornado full flush means solids still clear in one push, which is the combination that keeps the savings honest. Just confirm your whole household, including guests and kids, will actually use the small button, since that 0.8 gallon flush is where the savings live.

Check price on Amazon
Bottom Line: The 0.8 GPF toilet to beat, pairing a market-low 0.8 gallon light flush with a perfect 1,000 gram Tornado full clear in a skirted body.
Swiss Madison St Tropez toilet
2
Best Modern Value

Swiss Madison St. Tropez

4.4 Best low cost light flush

The St. Tropez delivers a true 0.8 gallon light flush in a sleek skirted one-piece at a level well below the premium brands, which makes it the value way into the 0.8 GPF category for a modern bathroom.

Flush TypeSiphon dual flush
GPF0.8 partial / 1.28 full
MaP Score800 g full flush
Bowl HeightComfort height, elongated
Warranty1-year limited
Best For
  • The lowest light flush for less
  • Modern, low-profile bathrooms
  • Buyers wanting a complete package
Not Ideal For
  • Buyers wanting a long brand record
  • Bathrooms with weak supply pressure

The St. Tropez pairs a 0.8 gallon partial flush, among the lowest available anywhere, with a 1.28 gallon full flush that reaches an 800 gram MaP score, so it clears solids cleanly without pressing the button twice. Its appeal is the combination of that very low water use with a contemporary low-profile design and a fully skirted base that wipes clean in seconds. The soft-close seat and the button plate are included, which keeps the package complete out of the box and adds real value.

Swiss Madison is a newer brand than the established names, so its long-term reliability record and parts depth are not as deep, and a few owners note the compact tank can refill a little slowly between flushes. Owner reviews are broadly positive on looks and flush strength, with the usual caution to confirm the bolt-down and supply connection on install. For a water-minded buyer who also wants a modern look for less, it is a strong 0.8 GPF value, and it carries over from our guide to the best low flow toilets at 1.28 GPF and under.

Expert Take

Choose the St. Tropez when squeezing the water bill is the priority and you like a clean modern shape. The 0.8 gallon partial flush is as low as the category goes, and the included soft-close seat and button plate make it a genuine value buy. Go in knowing Swiss Madison is a younger brand, so order a spare flush mechanism if long-term parts availability matters to you.

Check price on Amazon
Bottom Line: A modern skirted one-piece with a market-low 0.8 gallon light flush and a complete in-box package, from a younger brand.
Woodbridge T-0019 dual flush toilet
3
Best Designer One-Piece

Woodbridge T-0019

4.6 Best premium look for less

The T-0019 is Woodbridge's skirted dual flush one-piece, offering a designer body that looks far more expensive than it costs with a genuine 0.8 gallon light flush for buyers who want the lowest water draw and an upscale shape.

Flush TypeSiphon dual flush
GPF0.8 partial / 1.28 full
MaP Score800 g full flush
Bowl HeightComfort height, elongated
Warranty5-year (china), 1-year parts
Best For
  • Renovated, design-forward bathrooms
  • Easy-to-clean skirted bodies
  • Buyers wanting a soft-close seat included
Not Ideal For
  • Buyers needing universal generic parts
  • Shoppers confused by similar model numbers

The T-0019 is a fully skirted one-piece, so the trapway hides behind a smooth side panel and the seamless body wipes clean in one pass. Its dual flush pairs a 0.8 gallon partial flush with a 1.28 gallon full flush that posts an 800 gram MaP score, enough to clear solids in one push, so the light flush lowers your average while the full flush keeps it honest. The soft-close seat is included, a real bonus at this level, and the comfort-height elongated bowl suits most adults.

Owner reviews run deep and consistently praise a clean flush, a quiet refill and the upscale skirted shape that hides the trapway entirely. The tradeoff is that Woodbridge parts are less universal than TOTO or Kohler, so a repair may mean ordering a specific mechanism rather than grabbing a generic one, and the brand sells under several similar model numbers, so confirm the exact number and the 0.8 gallon dual flush before ordering. For designer styling with the lowest water use, it is a standout 0.8 GPF choice and a regular pick among the best eco friendly toilets for a greener bathroom.

Expert Take

Pick the T-0019 when the bathroom is on display and you still want the lowest 0.8 gallon light flush. The skirted one-piece cleans fast and looks premium for the money, and the included soft-close seat sweetens the deal. Just confirm you are ordering the dual flush 0.8 gallon variant, since Woodbridge lists multiple flush configurations under similar numbers, and keep a spare flush mechanism on hand.

Check price on Amazon
Bottom Line: A designer skirted one-piece with a true 0.8 gallon light flush and an included soft-close seat, at slightly less universal parts.
TOTO Vespin II dual flush toilet
4
Best Skirted Two-Piece

TOTO Vespin II

4.6 Best clean-line dual flush

The Vespin II brings TOTO's dual flush and a skirted, easy-clean body into a two-piece that is lighter to install than a one-piece, with a low light flush near the 0.8 gallon class and a strong Tornado full flush.

Flush TypeDynamax Tornado dual flush
GPF0.9 partial / 1.28 full
MaP Score800 g full flush
Bowl HeightComfort height, elongated
Warranty1-year limited
Best For
  • A skirted look in a two-piece
  • Buyers wanting easy installation
  • Low average use with TOTO reliability
Not Ideal For
  • Buyers needing the absolute 0.8 light
  • Strict budgets

The Vespin II uses TOTO's Dynamax Tornado dual flush, with a light flush near 0.9 gallons and a 1.28 gallon full flush that reaches an 800 gram MaP score, so it sits at the practical edge of the 0.8 GPF class while clearing solids in one push. Its light flush is a touch above the lowest 0.8 gallon models, but its full flush is among the strongest dual flush clears here, which is the trade that keeps double flushing from creeping in.

The fully skirted two-piece body gives the clean look of a one-piece with the lighter weight and easier handling of a two-piece during install, and the CeFiONtect glaze keeps the bowl cleaner between wipes. Owner reviews praise the powerful, quiet flush and the simple maintenance of the smooth sides. The downsides are a level above value dual flush picks and a light flush slightly above the 0.8 gallon floor. For a buyer who wants TOTO reliability and a skirted look without the weight of a one-piece, the Vespin II is a strong pick, and it features among the best EPA WaterSense certified toilets.

Expert Take

The Vespin II is what I point buyers to when they want a skirted dual flush but find one-pieces too heavy to set alone. You get TOTO's strong 800 gram Tornado full flush and a low light flush in a body that wipes clean like a one-piece yet installs in two manageable parts. Accept that the light flush is near 0.9 rather than the absolute 0.8 gallon floor, since the stronger full flush is worth it.

Check price on Amazon
Bottom Line: A skirted dual flush two-piece with a low light flush and a strong 800 gram Tornado full clear, easier to install than a one-piece.
Kohler Santa Rosa dual flush toilet
5
Best Compact One-Piece

Kohler Santa Rosa

4.5 Best for small bathrooms

The Santa Rosa is Kohler's compact dual flush one-piece, fitting a 0.8 gallon light flush and a strong canister full flush into a short, space-saving body that suits powder rooms and tight installs.

Flush TypeAquaPiston canister dual flush
GPF0.8 partial / 1.28 full
MaP Score800 g full flush
Bowl HeightComfort height, compact elongated
Warranty1-year limited
Best For
  • Small bathrooms and powder rooms
  • Buyers wanting a major brand
  • Easy local parts and repairs
Not Ideal For
  • Buyers wanting full-size elongated room
  • Shoppers wanting a fully skirted base

The Santa Rosa pairs a 0.8 gallon partial flush with a 1.28 gallon full flush that reaches an 800 gram MaP score using Kohler's AquaPiston canister, which releases water into the bowl from all sides for a strong, even single flush. Its compact elongated bowl gives the comfort of an elongated shape in nearly the footprint of a round bowl, which is why it is a frequent choice for small bathrooms where the lowest water use still matters.

Because Kohler is sold in every big-box store, replacement seals and dual flush parts are easy to find locally for years, which is a real advantage over boutique brands, and the canister flush seals more reliably over time than a cheap flapper. Owner reviews praise the space savings and the strong, quiet flush, with the occasional note that the one-piece is heavy to set in a tight room. For a small bathroom that still wants a 0.8 gallon light flush, the Santa Rosa is the smart compact pick, and it appears in our guide to the best water saving toilets of 2026.

Expert Take

The Santa Rosa is the 0.8 GPF toilet I point small-bathroom buyers to, because you get a compact elongated one-piece with a 0.8 gallon light flush and a sealed canister valve from a brand whose parts sit on every hardware-store shelf. That parts availability matters years down the line when a worn fill valve becomes a quick fix rather than a special order. Skip it only if you want a full-size bowl or a fully skirted base.

Check price on Amazon
Bottom Line: A compact dual flush one-piece with a 0.8 gallon light flush and a strong 800 gram canister clear, ideal for small bathrooms.
American Standard H2Option dual flush toilet
6
Best Value Two-Piece

American Standard H2Option

4.5 Strongest dual flush clear

The H2Option is American Standard's value dual flush, pairing a low light flush with the strongest full-flush MaP score in this roundup, a full 1,000 grams, well below the premium dual flush models.

Flush TypeSiphon dual flush, 3 in valve
GPF0.92 partial / 1.28 full
MaP Score1,000 g full flush
Bowl HeightComfort height, elongated
Warranty10-year limited
Best For
  • The strongest dual flush clearing
  • Households with a clog history
  • Long warranty seekers
Not Ideal For
  • Buyers needing the absolute 0.8 light
  • Shoppers wanting a skirted body

The H2Option uses a low light flush near 0.92 gallons and a 1.28 gallon full flush that reaches a 1,000 gram MaP score, the highest of any model here, driven by a wide 3 inch flush valve that dumps water into the bowl faster and harder than a standard valve. That extra clearing power means the full flush handles heavy loads as strongly as a dedicated power toilet, so double flushing on solids is off the table even with the low average a dual flush delivers.

The EverClean glazed trapway resists the buildup of stains and odor-causing bacteria, so the bowl stays fresher between cleanings, and the ten-year limited warranty is among the longest in the category. It is a comfort-height elongated two-piece with practical, utilitarian styling, so the seam and base contours need occasional wiping, and the light flush is slightly above the 0.8 gallon floor. For the strongest dual flush clearing per dollar, though, the H2Option is the clear value answer, and a frequent pick among the best EPA WaterSense certified toilets.

Expert Take

Buy the H2Option when the budget is tight but you refuse to gamble on the full flush. The 3 inch valve gives it a 1,000 gram clear that matches power toilets, so heavy loads go in one push, and the long warranty backs the durability. Accept that the light flush is near 0.92 rather than the absolute 0.8 gallon floor, since the much stronger full flush is what guarantees you never push twice.

Check price on Amazon
Bottom Line: The strongest dual flush clear on a budget, with a 1,000 gram full flush from a fast 3 inch valve and a long warranty.
Gerber Avalanche dual flush toilet
7
Best Contractor Value

Gerber Avalanche

4.3 Best low-cost dual flush

The Avalanche is Gerber's value dual flush toilet, a plumber favorite that delivers a genuine 0.8 gallon light flush and dependable clearing for one of the lowest costs in the 0.8 GPF category.

Flush TypeGravity siphon dual flush
GPF0.8 partial / 1.28 full
MaP Score800 g full flush
Bowl HeightComfort height, elongated
Warranty5-year limited (china)
Best For
  • 0.8 GPF on a tight budget
  • Rental units and fleets
  • No-frills reliable flushing
Not Ideal For
  • Buyers wanting designer styling
  • Shoppers chasing a 1,000 gram MaP

Despite its low cost, the Avalanche posts an 800 gram MaP score on its 1.28 gallon full flush with a wide glazed trapway, so it resists clogs about as well as toilets that cost far more while pairing it with a true 0.8 gallon light flush for the lowest average. For a hardworking or rental bathroom where the lowest water use is the goal and budget is tight, that combination of strength and value is hard to beat.

Gerber is a long-time plumber favorite because its toilets are dependable and inexpensive to service, and the simple two-piece design installs with standard fittings. The 800 gram MaP is strong but a step below the 1,000 gram leaders, and the styling is plain with an exposed trapway. For raw 0.8 GPF value per dollar, though, the Avalanche is the smart-money contractor choice, much like its siblings in our guide to the best low flow toilets at 1.28 GPF and under.

Expert Take

For a budget or rental 0.8 GPF toilet, the Avalanche is the one I trust. You get a dependable 800 gram full flush and a real 0.8 gallon light flush at a level that makes outfitting several bathrooms easy, and Gerber's plumbing-trade pedigree means it holds up under heavy use. Accept the plainer styling and the slightly lower MaP as the price of that value, since the full flush still clears the bowl in one push.

Check price on Amazon
Bottom Line: A contractor-grade dual flush with a true 0.8 gallon light flush and an 800 gram full clear for the least money, ideal for rentals.
TOTO Aquia IV 1G dual flush toilet
8
Best Near-1-Gallon Average

TOTO Aquia IV 1G

4.6 Lowest combined average

The Aquia IV 1G is the ultra-efficient sibling of the standard Aquia IV, pairing the same 0.8 gallon light flush with a reduced 1.0 gallon full flush, so its combined average is among the lowest of any toilet that still clears solids in one push.

Flush TypeDynamax Tornado dual flush
GPF0.8 partial / 1.0 full
MaP Score800 g full flush
Bowl HeightComfort height, elongated
Warranty1-year limited
Best For
  • The lowest combined water average
  • Drought-prone or metered regions
  • Buyers wanting maximum savings
Not Ideal For
  • Homes with low supply pressure
  • Long, near-horizontal drain lines

The Aquia IV 1G drops the full flush all the way to 1.0 gallon while keeping the 0.8 gallon light flush, and it still posts a perfect 1,000 gram MaP score thanks to TOTO's Tornado swirl, which scours the bowl efficiently enough that a single gallon clears solids cleanly. That combination gives one of the lowest effective flush volumes you can buy, which is why it appeals to drought-prone regions and the most water-conscious buyers.

Because the full flush uses so little water, this model rewards good plumbing: it performs best with normal supply pressure and a properly pitched drain line, and TOTO notes it suits homes where the drain run is not unusually long or flat. The skirted body and CeFiONtect glaze match the standard Aquia IV for easy cleaning, and owner reviews praise the savings, with the occasional reminder to confirm your drain line before choosing the 1.0 gallon version over the 1.28. For the absolute lowest combined average with a clean clear, the Aquia IV 1G is the pick, and it leads our roundup of the best eco friendly toilets for a greener bathroom.

Expert Take

Choose the Aquia IV 1G when you want the lowest effective flush volume money can buy and your plumbing is sound. The 0.8 gallon light flush plus a 1.0 gallon full flush is about as low as a working toilet goes, and the perfect 1,000 gram MaP means solids still clear in one push. Just verify your supply pressure and drain pitch first, since a 1.0 gallon full flush has less margin than a 1.28 gallon one on a long or flat drain line.

Check price on Amazon
Bottom Line: The lowest combined average here, pairing a 0.8 gallon light flush with a 1.0 gallon full flush that still clears at 800 grams.
Expert Take

If I had to cover almost every 0.8 GPF situation with two toilets, I would keep the TOTO Aquia IV for the best overall blend of a 0.8 gallon light flush and a perfect 1,000 gram full flush, and the American Standard H2Option when local parts and a lower price matter more, since its own 1,000 gram clear from a 3 inch valve also handles heavy loads no dual flush should struggle with. That pairing covers both sides of the 0.8 GPF promise, the lowest average use and the strongest clear, and it sidesteps the weak-full-flush trap that makes a cheap dual flush double flush on solids and quietly erase its own savings.

What Is the Best 0.8 GPF Toilet?

The best 0.8 GPF toilet is the TOTO Aquia IV. Its dual flush uses just 0.8 gallons on the light flush for liquids and switches to a 1.28 gallon Dynamax Tornado full flush rated a perfect 1,000 grams on the MaP test, so it delivers the lowest household water average while still clearing solids in a single push. The Swiss Madison St. Tropez is the best value 0.8 GPF pick, and the American Standard H2Option also reaches the 1,000 gram ceiling on its full flush.

Nearly every 0.8 GPF toilet is a dual flush model, so the best one pairs a genuine 0.8 gallon light flush with a full flush strong enough to never push twice. The Aquia IV hits that balance with TOTO's proven Tornado swirl and a skirted, easy-clean body. Judge any 0.8 GPF toilet by its full-flush MaP score first, then by how low its light flush goes.

Is a 0.8 GPF Toilet Powerful Enough to Avoid Clogs?

Yes, a 0.8 GPF toilet avoids clogs when you choose one with a strong full flush. The 0.8 gallon figure is the light flush for liquids, while solids are cleared by a 1.0 to 1.28 gallon full flush that should score 800 grams or higher on the MaP test. Models like the TOTO Aquia IV and American Standard H2Option clear solids in one push because their full flush matches dedicated power toilets, not because 0.8 gallons does the heavy lifting.

The mistake that causes clogs is treating 0.8 gallons as the flush for everything. It is not; it is the partial flush for liquids and paper only. Use the larger button for solids, and a well-rated dual flush with a glazed trapway clears the bowl as cleanly as any high-volume toilet, with no more clogs than a 1.6 gallon model.

Which 0.8 GPF Toilet Offers the Best Value?

The Swiss Madison St. Tropez offers the best value 0.8 GPF toilet. It delivers a true 0.8 gallon light flush and an 800 gram full flush in a skirted one-piece with an included soft-close seat, well below the premium brands. For the strongest full flush on a budget, the American Standard H2Option pairs a low light flush with a 1,000 gram clear and a ten-year warranty.

Value for a 0.8 GPF toilet means the lowest light flush plus a full flush that will not strand you on a second push, since double flushing on solids wastes more water than the 0.8 gallon light flush saves. The St. Tropez covers the modern, complete-package buyer, while the H2Option wins for anyone who wants maximum clearing power for the money.

What Is a Good MaP Score for a 0.8 GPF Toilet?

For a 0.8 GPF toilet, a good full-flush MaP score is 800 grams or higher, with 1,000 grams being the practical ceiling and the safest choice. The MaP (Maximum Performance) test measures how many grams of solid waste a toilet clears in a single flush, and it is run on the full flush, not the 0.8 gallon light flush. A high full-flush score means solids clear in one push, which protects the savings the low light flush delivers.

Always read the full-flush MaP score alongside the 0.8 gallon light figure. A dual flush with a 1,000 gram full flush, like the H2Option or the Aquia IV, locks in its savings, while a weak full flush forces double flushing that erases them. A full-flush score of 800 grams is strong and 1,000 grams is the ceiling.

How to choose a 0.8 GPF toilet

Buying a 0.8 GPF toilet comes down to four checks that general toilet guides tend to gloss over: how strong the full flush is on the MaP test, whether the model is genuinely WaterSense certified, whether the dual flush valve is reliable, and whether the body and fit suit your bathroom and your drain line. Work through the sections below before you buy and you will land on a 0.8 GPF model that genuinely cuts your water use without leaking or forcing a second flush on solids.

Understand that 0.8 GPF is the light flush, not the whole flush

The single most important thing to know about a 0.8 GPF toilet is that the 0.8 gallon figure almost always refers to the light, or partial, flush of a dual flush model. A single fixed 0.8 gallon flush for everything is rare and not recommended, because that little water cannot reliably carry a solid load through the trap. In a dual flush, you press the small button for liquids and paper, which uses 0.8 gallons, and the larger button for solids, which uses a 1.0 to 1.28 gallon full flush. Because most daily uses are liquid only, the 0.8 gallon light flush pulls the household average to the floor, lower than even a 1.28 gallon WaterSense single flush. The light flush saves the water, but the full flush clears the bowl, so buy a strong full flush first. For how the volumes compare across the category, see our breakdown of 1.28 GPF vs 1.6 GPF toilets and which to choose.

Read the full-flush MaP score, not the 0.8 gallon figure

The number on the box that everyone notices is the 0.8 gallon light flush, but the number that decides whether a 0.8 GPF toilet actually works is its full-flush MaP score. MaP (Maximum Performance) is an independent test that measures how many grams of solid waste a toilet clears in a single flush, and the test is run on the full flush because that is what handles solids. A reading of 600 grams handles a typical home, 800 grams is strong, and 1,000 grams is the practical ceiling. A dual flush with an 800 to 1,000 gram full flush, like the Aquia IV or H2Option, clears solids in one push and locks in the savings, while a weak full flush forces a second push. Two full flushes use far more water than the 0.8 gallon light flush ever saves, so buy clearing power first, then enjoy the low average.

The 0.8 gallon light flush only saves water if everyone in the house actually uses the small button. A dual flush toilet's savings live entirely in how often the partial flush is chosen for liquids. If children, guests or anyone in the household defaults to the large button every time, the 0.8 gallon light flush never gets used and the toilet behaves like a plain 1.28 gallon model. Pick a model with a clearly marked button plate, and if your household will not adapt to two buttons, a strong single flush 1.28 gallon toilet may save you more in practice. For that path, see our roundup of the best water saving toilets of 2026.

Confirm WaterSense certification for verified savings

The EPA WaterSense label is the simplest way to know a 0.8 GPF dual flush truly saves water. For dual flush toilets, WaterSense certifies based on an effective flush volume that weights the light and full flushes together, and a certified model must use an effective 1.28 gallons or less while passing flush performance standards, so you are not trading clearing power for the low light-flush number. WaterSense toilets use at least 20 percent less water than the federal 1.6 gallon maximum, and many local water utilities offer rebates when you replace an older toilet with a certified model, which can offset much of the purchase. Read the listing and confirm the WaterSense label before buying. For models chosen specifically for this label, see our roundup of the best EPA WaterSense certified toilets.

Match the rough-in, bowl height and check your drain line

Even the most efficient 0.8 GPF toilet is useless if it does not fit your bathroom. Rough-in is the distance from the finished wall to the center of the floor drain bolts, and most homes use 12 inches, though some older houses have a 10 or 14 inch rough-in. Comfort-height bowls sit around 17 to 19 inches off the floor and suit most adults, while standard height saves a little space, and an elongated bowl is more comfortable while a round or compact bowl fits a tighter room. With the lowest-volume dual flush models, also confirm your supply pressure is normal and your drain line is not unusually long or flat, because a 1.0 gallon full flush has less margin than a 1.28 gallon one on a poorly pitched drain. For the broadest fit and flush advice across the whole category, our pillar guide to the best flushing toilets covers it in detail.

Expert Take

The mistake I see most often with 0.8 GPF toilets is buying on the light-flush number alone and ignoring the full-flush MaP score and the button habits of the household. For a 0.8 GPF toilet, the order of priority is a strong full-flush MaP of 800 grams or more, then WaterSense certification, then a reliable dual flush valve, then body style, fit and drain line. Get those right, confirm everyone will use the small button, and a 0.8 gallon light flush delivers the lowest water average for years without leaking or double flushing.

Sources

  • EPA WaterSense, epa.gov/watersense
  • MaP (Maximum Performance) flush testing, map-testing.com
  • Manufacturer published specifications (TOTO, Kohler, American Standard)
FAQ

Frequently asked questions

? What is a 0.8 GPF toilet?

A 0.8 GPF toilet uses 0.8 gallons per flush on its lightest flush, the lowest flush volume sold in North America and half the 1.6 gallon federal maximum. In nearly every case the 0.8 gallon figure is the light, or partial, flush of a dual flush model, paired with a stronger 1.0 to 1.28 gallon full flush for solids. The 0.8 gallon light flush handles liquids and paper to lower your household water average.

? What is the best 0.8 GPF toilet?

The TOTO Aquia IV is the best 0.8 GPF toilet overall. Its dual flush uses 0.8 gallons on the light flush and a 1.28 gallon Dynamax Tornado full flush rated a perfect 1,000 grams on the MaP test, so it delivers the lowest water average while clearing solids in one push. The Swiss Madison St. Tropez is the best value, and the American Standard H2Option also reaches 1,000 grams on its full flush.

? Is there a toilet that flushes everything with only 0.8 gallons?

Almost none, and they are not recommended. A fixed single 0.8 gallon flush rarely carries a solid load through the trap in one push, which forces double flushing that wastes water. That is why 0.8 GPF toilets are dual flush: 0.8 gallons for the light flush and 1.0 to 1.28 gallons for the full flush. The dual flush is what makes such a low light flush practical.

? How much water does a 0.8 GPF toilet save?

A lot, because the toilet is usually the largest single water user inside a home and most daily uses trigger the 0.8 gallon light flush. Replacing an older 3.5 gallon toilet with a dual flush whose light flush is 0.8 gallons cuts most flushes by more than 75 percent. Across a year that adds up to thousands of gallons for a typical household, which shows up on the water bill.

? Do 0.8 GPF toilets clog more often?

Not if you use the full flush for solids and choose a model with a strong full-flush MaP score. The 0.8 gallon light flush is for liquids only; solids are cleared by the 1.0 to 1.28 gallon full flush, which should score 800 grams or higher. The Aquia IV and H2Option clear solids as cleanly as any high-volume toilet, so clogs are no more common than with a 1.6 gallon model.

? Are 0.8 GPF toilets WaterSense certified?

The best ones are. For dual flush models, WaterSense certifies on an effective flush volume that weights the light and full flushes together, and a certified model must use an effective 1.28 gallons or less while passing performance standards. Most quality 0.8 GPF dual flush toilets qualify, but confirm the WaterSense label on the listing before buying to be sure.

? What is the difference between 0.8 GPF and 1.28 GPF?

1.28 gallons is the EPA WaterSense single flush ceiling, while 0.8 gallons is the light flush of a dual flush model. A 0.8 GPF dual flush uses 0.8 gallons for liquids and a 1.28 gallon full flush for solids, so it lowers the yearly average below a flat 1.28 gallon toilet. A 1.28 gallon single flush is simpler, with one strong flush and no buttons to learn.

? Can I get a rebate for a 0.8 GPF toilet?

Often, yes. Many local water utilities and municipalities offer rebates when you replace an older toilet with an EPA WaterSense certified model, and most quality 0.8 GPF dual flush toilets carry that label. The amount and rules vary by region, so check your water provider's website before buying, and confirm the toilet carries the WaterSense label to be eligible.

? What is a good MaP score for a 0.8 GPF toilet?

A good full-flush MaP score for a 0.8 GPF toilet is 800 grams or higher, with 1,000 grams being the practical ceiling and the safest choice. The MaP test measures how many grams of solid waste the full flush clears in one push, and it is run on the full flush, not the 0.8 gallon light flush, so a high score there prevents the double flushing that would erase your savings.

? Why does my dual flush toilet keep running?

A running dual flush toilet almost always means the flush valve or seal has failed to seat, letting water trickle from the tank into the bowl around the clock. Dual flush valves have more moving parts than a simple flapper, so they need an occasional seal replacement. The fix is to replace the seal, which is why buying a brand with easy parts availability matters, since a silent leak wastes far more than the low flush ever saves.

? Do 0.8 GPF toilets save money?

Yes. Because the toilet is the largest indoor water user in most homes and most uses trigger the 0.8 gallon light flush, a dual flush cuts water use sharply, which lowers the monthly water bill. Many utilities also offer rebates for installing a WaterSense model, so the savings come from both lower usage and the upfront rebate.

? Which brands make the best 0.8 GPF toilets?

TOTO leads for dual flush quality with the Aquia IV's perfect 1,000 gram full flush and the Vespin II, Kohler offers the compact Santa Rosa with easy parts, and American Standard matches that full-flush strength with the 1,000 gram H2Option at a lower price. Woodbridge and Swiss Madison offer modern skirted designs for less, while Gerber covers the contractor and rental budget with the Avalanche.

? Are 0.8 GPF dual flush toilets noisy?

Not by older standards. Siphonic and swirling dual flushes like TOTO's Tornado are quiet, while a fast large-valve full flush like the H2Option's 3 inch valve is a touch louder because it moves water quickly. The 0.8 gallon light flush is generally very quiet since it uses so little water. If quiet matters most, favor a siphonic dual flush over a fast gravity model.

? Will everyone in my house use the small button?

That is the key question, because the savings live entirely in how often the 0.8 gallon light flush is chosen. Children and guests sometimes default to the large button, which negates the savings. Choose a model with a clearly marked button plate, and if your household will not adapt to two buttons, a strong single flush 1.28 gallon toilet may save you more in practice.

? Do 0.8 GPF toilets need higher water pressure?

The lowest-volume models perform best with normal supply pressure and a properly pitched drain line. A standard 0.8 over 1.28 gallon dual flush works on typical home plumbing, but a model with a reduced 1.0 gallon full flush, like the Aquia IV 1G, has less margin on a long or flat drain run. Confirm your supply pressure and drain pitch before choosing the lowest full flush.

? Do 0.8 GPF toilets come with a seat?

It varies. One-piece models from Swiss Madison and Woodbridge often include a soft-close seat in the box, while two-piece toilets from TOTO and Kohler frequently sell the seat separately. Check the listing before ordering so you are not surprised, and confirm the seat shape matches the bowl, since elongated and round seats are not interchangeable.

? What rough-in size do 0.8 GPF toilets use?

Most 0.8 GPF dual flush toilets use a standard 12 inch rough-in, the distance from the finished wall to the center of the floor bolts, though 10 and 14 inch versions exist for older homes. Measure yours before buying, since the rough-in must match regardless of the flush volume, and a skirted dual flush model in particular needs the correct fit to sit flush against the wall.

? Is a one-piece or two-piece 0.8 GPF toilet better?

A one-piece like the Kohler Santa Rosa or Swiss Madison St. Tropez has no tank-to-bowl seam, wipes clean fastest and often looks more modern, but it is heavier to install. A two-piece like the TOTO Vespin II or American Standard H2Option is lighter, often cheaper and easier to maneuver, with a seam to wipe. Both can use an identical 0.8 gallon light flush, so the choice is about cleaning, weight and budget.

? How do I get the most water savings from a 0.8 GPF toilet?

Use the small 0.8 gallon button for every liquid use, choose a model with a strong full-flush MaP so you never double flush on solids, and check the dual flush valve regularly for a silent leak. A clearly marked button plate that the whole household actually uses, combined with a sealed valve, delivers the full savings the 0.8 gallon light flush promises across the year.

Our Verdict

For the best mix of the lowest water average and a flush strong enough to never push twice, the TOTO Aquia IV is the best 0.8 GPF toilet, pairing a market-low 0.8 gallon light flush with a 1.28 gallon, perfect 1,000 gram Dynamax Tornado full flush in a skirted, glazed body. Choose the Swiss Madison St. Tropez for the best modern value, the American Standard H2Option for that same 1,000 gram full-flush strength at a lower price, the Kohler Santa Rosa for small bathrooms, the TOTO Vespin II for a skirted two-piece, and the Gerber Avalanche for the tightest contractor budget. Remember that 0.8 GPF is the light flush of a dual flush model, so judge the full-flush MaP score and WaterSense certification first, confirm everyone will use the small button, then enjoy the lowest water bill a 0.8 gallon flush can deliver.

How we rank & our data sources

We do not run physical lab tests. Rankings are built from published, verifiable data and real owner feedback, never paid placement.

Researched by Nadia Okafor · Last updated July 4, 2026 · Our review method

N
Researched by Nadia Okafor

Nadia tracks EPA WaterSense certification, GPF and long-term water-saving performance, focusing on fixtures that cut water use without sacrificing flush power. All findings come from published efficiency data and verified owner reviews, not lab testing.

Updated July 2026 · Buying Guides
Keep reading

Related guides

How Often Should You Replace Your Toilet? Complete Guide

How Often Should You Replace Your Toilet? Complete Guide

Buying Guides
4.6

Most toilets last 25 to 50 years, but the smart replacement window is usually the 20-year mark. Here is what the signs,…

Read the guide

Bathroom Vanity Buying Guide: Size, Style, Storage 2026

Buying Guides
4.6

Everything you need to measure correctly, match your plumbing, pick the right style, and avoid the most costly mistakes buyers make when…

Read the guide

Low Water Pressure in Bathroom: Causes and Fixes

Buying Guides
4.6

A practical, data-driven guide to diagnosing weak water pressure at sinks, showers and toilets -- and restoring full flow without expensive plumber…

Read the guide