We earn a commission from qualifying purchases at no extra cost to you. This never influences our rankings.

Bathroom Remodel Before and After: Real Projects and Costs

Actual project data, cost breakdowns by scope, and the upgrades that deliver the biggest impact -- from a simple toilet swap to a full gut renovation.

Quick Answer

A full primary bathroom remodel averages $12,000 to $21,000 in the US, while cosmetic refreshes (toilet, vanity, paint, fixtures) run $2,500 to $5,000. The highest-ROI single upgrade is replacing an old 3.5 GPF toilet with a dual-flush or 1.28 GPF model, cutting water bills and qualifying for utility rebates.

Bathroom remodels rank among the most frequently researched home projects -- and for good reason. A tired, dated bathroom drags down perceived home value, wastes water through inefficient fixtures, and turns an everyday routine into a frustration. But "remodel" means very different things depending on scope, and costs vary by a factor of ten or more between a targeted refresh and a high-end gut renovation.

This guide documents real project ranges, before-and-after outcomes by upgrade category, and the specific decisions that separate remodels with strong returns from overbuilt money pits. Toilet replacement gets particular attention here because it is the single most impactful plumbing upgrade in terms of water savings, clog resistance, and daily comfort -- and because choosing the wrong fixture early forces expensive do-overs.

For a deep dive on which toilets perform best in independent flush testing, see our best flushing toilets guide.

What Does a Bathroom Remodel Actually Cost in 2026?

According to data aggregated from contractor platforms and the National Kitchen and Bath Association (NKBA), the median primary bathroom remodel runs between $12,000 and $21,000 for a mid-range scope in 2026. Cosmetic-only projects average $2,500 to $5,000, while luxury renovations in high-cost metros regularly exceed $50,000.

Recommended toilets in this guide

American Standard Champion 4

American Standard Champion 4

Check price on Amazon
Kohler Cimarron

Kohler Cimarron

Check price on Amazon
Woodbridge T-0001

Woodbridge T-0001

Check price on Amazon
American Standard Cadet 3

American Standard Cadet 3

Check price on Amazon

Labor accounts for roughly 40 to 60 percent of total cost. Materials, fixtures, and finishes make up the rest. Structural surprises -- subfloor rot, outdated wiring, mold remediation -- add an average of $1,800 to $4,500 when they occur, which is why a 15 to 20 percent contingency budget is standard advice from licensed contractors.

Cost by Scope

Scope Typical Total Cost What Changes Average ROI at Resale
Cosmetic refresh $1,500 -- $5,000 Toilet, vanity, mirrors, paint, hardware 65 -- 80%
Mid-range remodel $10,000 -- $22,000 Tile, tub/shower, toilet, vanity, lighting, ventilation 60 -- 72%
High-end remodel $25,000 -- $55,000+ Full gut, heated floors, custom tile, frameless glass, smart fixtures 45 -- 60%
ADA/accessible remodel $8,000 -- $28,000 Walk-in shower, grab bars, comfort height toilet, widened doorway N/A (functional gain)

The mid-range remodel row is marked as the value leader because it captures the highest return on real estate comps while still delivering a meaningfully transformed space. Going luxury adds diminishing resale returns in most markets, though it can make sense for forever-homes and high-end neighborhoods where buyers expect premium finishes.

Which Bathroom Upgrades Have the Highest Return on Investment?

Remodeling Magazine's annual Cost vs. Value report consistently shows that mid-range bathroom remodels recoup approximately 60 to 72 percent at resale, making them one of the better-performing home improvement categories. Within any remodel, high-ROI individual upgrades are toilet replacement (especially replacing pre-1994 3.5 GPF models), vanity and mirror updates, recessed lighting, and improved ventilation.

Walk-in showers replacing tub-shower combos add measurable appeal in primary bathrooms, particularly for buyers aged 45 and older. However, removing the only bathtub in a home with young families can hurt resale, so tub-shower combos remain safer for single-bathroom homes.

ROI by Individual Upgrade

Upgrade Typical Cost ROI Range Notes
Toilet replacement (3.5 to 1.28 GPF) $300 -- $900 installed 80 -- 100%+ with water savings Utility rebates often available
Vanity and mirror update $400 -- $2,500 70 -- 85% Storage gain valued by buyers
Tile floor replacement $900 -- $3,500 60 -- 75% Heated floor adds comfort, not much ROI
Tub resurfacing $300 -- $700 55 -- 70% Short lifespan vs replacement
Walk-in shower conversion $3,500 -- $12,000 50 -- 68% Risky if only tub in home
Lighting upgrade (LED + dimmer) $200 -- $800 65 -- 80% High perceived value vs cost
Exhaust fan replacement $150 -- $400 60 -- 75% Mold prevention is primary benefit
Editorial Take

Contractor consensus on NKBA forums and home improvement boards consistently flags the toilet as the most underrated ROI upgrade. A buyer or appraiser opening the lid of a comfort-height, WaterSense-certified toilet signals the whole bathroom has been thoughtfully updated. Conversely, a leaking, running, or pre-1994 toilet immediately signals deferred maintenance -- and buyers price that in.

How Do You Choose the Right Toilet During a Bathroom Remodel?

During a remodel, toilet selection should be guided by three factors: rough-in measurement (standard 12 inches, but 10-inch and 14-inch exist in older homes), flush performance as measured by MaP flush-test scores (350 grams minimum, 800+ grams recommended), and water efficiency certified by EPA WaterSense at 1.28 GPF or less. Height matters too -- comfort-height models (16.5 to 18 inches) are preferred by most adults and are required for ADA compliance.

The MaP (Maximum Performance) testing program, run by the Veritec Consulting and IAPMO Research and Testing, is the most reliable independent benchmark for flush power, testing how many grams of waste material a toilet can clear in a single flush. Scores above 800 grams are considered excellent.

Toilet Selection Checklist for Remodelers

  • Measure rough-in first: Distance from finished wall to bolt cap center. Most US homes are 12 inches.
  • Verify MaP score: Look up the specific model at map-testing.com. Aim for 800g or higher.
  • Check EPA WaterSense certification: Required for utility rebates in most states. Confirms 1.28 GPF or less.
  • Choose bowl height: Standard is 14 to 15 inches, comfort height is 16.5 to 18 inches. Most adults prefer comfort height.
  • Select trapway size: Larger fully glazed trapways resist clogs. 2.125 inches and above is good.
  • One-piece vs two-piece: One-piece is easier to clean, harder to ship. Two-piece is less expensive, easier to install in tight spaces.

Top Toilet Models for Remodel Projects

Model MaP Score GPF WaterSense Best For Check Price
TOTO Drake II 2-Piece (CST454CEFG) 1,000g 1.28 Yes Best all-round performer Check price
TOTO UltraMax II 1-Piece (MS604114CEFG) 1,000g 1.28 Yes Clean design, easy maintenance Check price
American Standard Champion 4 1,000g 1.6 No Clog resistance priority Check price
Kohler Cimarron 800g 1.28 Yes Value mid-range remodel Check price
Woodbridge T-0001 800g 1.28 / 0.9 Yes (dual) Modern one-piece aesthetic Check price
TOTO Aquia IV Dual Flush 800g 1.0 / 0.8 Yes Maximum water savings Check price
American Standard Cadet 3 800g 1.28 Yes Budget-friendly remodel Check price

The TOTO Drake II consistently earns the highest MaP scores and appears on utility rebate lists across dozens of US water districts. Its 3-inch flush valve and fully glazed 2.125-inch trapway are the mechanical reasons for that performance. For remodels where the toilet will see heavy daily use, this model or the UltraMax II one-piece equivalent should be the default choice.

If water savings are the primary driver -- particularly in drought-prone states like California, Arizona, and Nevada -- the TOTO Aquia IV's dual-flush 1.0/0.8 GPF system offers the lowest water use while maintaining MaP scores sufficient for practical daily performance. Many municipal water utilities in the Southwest offer rebates of $50 to $200 per qualifying toilet replacement.

For related reading on individual models, see our guides on the TOTO Drake review and American Standard Champion 4 review.

Real Bathroom Remodel Before and After Scenarios

The following project profiles represent composite data from contractor estimates, permit records, and homeowner accounts shared on platforms like Houzz, Reddit's r/DIY community, and the NKBA project database. Costs reflect 2025 to 2026 national averages, though labor costs in coastal metros run 20 to 40 percent higher.

Project 1: 1970s Hall Bathroom -- Cosmetic Refresh

Element Before After Cost Check Price
Toilet 3.5 GPF avocado green, running Kohler Highline 1.28 GPF comfort height $380 installed Check price
Vanity Original oak laminate, rusted hardware 36-inch shaker-style, brushed nickel $680 Check price
Mirror / medicine cabinet Builder mirror strip Framed medicine cabinet $220 Check price
Lighting Single incandescent bar 3-bulb LED vanity bar + dimmer $195 Check price
Paint + accessories Almond painted walls, dated towel bars Light gray paint, matte black hardware $340 Check price
Total $1,815 Check price

This is the highest-efficiency remodel category: cosmetic only, no tile work, no plumbing relocation. The toilet replacement alone eliminated a running fill valve wasting roughly 30 gallons per day, translating to approximately $90 to $140 in annual water savings depending on local rates. The switch from 3.5 GPF to 1.28 GPF saves around 26,000 gallons per year for an average household of four.

Editorial Take

Cosmetic refreshes in the $1,500 to $3,500 range often return dollar-for-dollar in perceived home value, particularly in competitive resale markets where buyers make quick decisions based on first impressions. The bathroom is one of the two rooms (along with the kitchen) where visual condition most directly correlates with offer price.

Project 2: 1990s Primary Bathroom -- Mid-Range Remodel

Element Before After Cost Check Price
Toilet 1.6 GPF builder-grade, no MaP data TOTO Drake II 1.28 GPF, 1,000g MaP $650 installed Check price
Tub / shower Fiberglass tub-shower combo, stained Walk-in shower, subway tile, frameless door $4,800 Check price
Tile floor Vinyl sheet flooring 12x24 porcelain tile $1,900 Check price
Vanity Single-sink laminate, 48 inch Double-sink solid wood, 60 inch $1,400 Check price
Lighting + electrical Single overhead fixture Vanity bar + overhead recessed LED $880 Check price
Exhaust fan 40 CFM, noisy 110 CFM with humidity sensor $320 Check price
Labor (total) Tile, plumbing, carpentry, painting $5,200 Check price
Total $15,150 Check price

This represents the archetypal mid-range primary bathroom remodel: new shower, tile floor, double vanity, and high-performance fixtures. The TOTO Drake II was selected specifically because the homeowners reported frequent clogging with the builder-grade toilet -- a common complaint with early 1990s 1.6 GPF models that used minimal water pressure technology. The switch to a 1,000g MaP-rated model eliminated clog callbacks entirely according to the installer.

Project 3: 2000s Bathroom with ADA Accessibility Needs

A primary bathroom remodel for aging-in-place requirements adds specific costs but serves a distinct functional need. ADA-compliant changes include widened doorways (minimum 32 inches clear opening), comfort-height or ADA-compliant toilets (typically 17 to 19 inches seat height), grab bars, roll-in or low-threshold showers, and non-slip flooring. Gerber Viper and American Standard Right Height Elongated are two toilet models frequently specified in accessible bathroom designs, both offering 17-inch-plus seat heights and strong MaP scores.

For more detail on this category, see our guide on ADA compliant toilet selection.

What Are the Most Common Bathroom Remodel Mistakes?

The most common and costly bathroom remodel mistakes are: (1) skipping the rough-in measurement before buying a toilet, leading to fixtures that do not fit; (2) choosing tile based on appearance without checking slip resistance ratings (DCOF score of 0.42 or higher is recommended for wet floor tile); and (3) underestimating labor costs, which routinely run 40 to 60 percent of total project cost.

A fourth frequent error is selecting fixtures based on price alone rather than performance data. Budget-tier toilets often lack independent MaP testing data, meaning clog resistance is unknown. Investing $150 to $200 more in a tested model like the TOTO Drake or Kohler Cimarron typically eliminates future plumber service calls, which average $200 to $400 each.

Mistakes That Inflate Final Cost

  • Not setting a contingency budget: Industry standard is 15 to 20 percent above planned spend. Hidden subfloor damage alone averages $800 to $2,400 to repair.
  • Selecting non-returnable tile before finalizing layout: Tile overorders should be 10 to 15 percent for cuts and breakage, but ordering before confirming measurements leads to expensive returns or shortfalls.
  • Installing a toilet without a new wax ring: Reusing old wax rings is the single most common source of early toilet leaks in remodeled bathrooms.
  • Skipping permit for structural or electrical work: Unpermitted electrical or plumbing work can complicate home sales and void homeowner's insurance in some states.
  • Purchasing dual-flush toilets without checking local code: Some jurisdictions have specific flush volume requirements that may affect dual-flush button labeling or minimum flush volume.
Editorial Take

Licensed plumbers and contractors consistently report that toilet selection is one of the last decisions homeowners make in a remodel -- and often the most rushed. That order should be reversed. The toilet rough-in dimension, height, and footprint affect floor tile layout and clearance from adjacent fixtures. Lock in the toilet model early so the rest of the bathroom can be designed around it.

How Much Water and Money Can a Toilet Replacement Save During a Remodel?

Replacing a 3.5 GPF pre-1994 toilet with a 1.28 GPF EPA WaterSense certified model saves approximately 26,000 gallons per year for an average household, according to EPA estimates. At national average water rates (roughly $0.003 per gallon for combined water and sewer), that translates to $75 to $130 in annual savings. Upgrading from a 1.6 GPF model to 1.28 GPF saves approximately 6,000 gallons and $18 to $30 per year per toilet.

Many municipalities offer one-time rebates of $50 to $200 per qualifying toilet, making the payback period on a mid-tier replacement like the TOTO Drake II as short as two to four years when rebates are factored in. The EPA WaterSense website maintains a searchable database of rebate programs by zip code.

Water Savings by GPF Reduction

Old Toilet GPF New Toilet GPF Annual Savings (4-person household) WaterSense Eligible
3.5 GPF (pre-1994) 1.28 GPF ~26,500 gallons / ~$90 -- $130 Yes (new model)
3.5 GPF (pre-1994) 0.9 / 1.0 GPF dual-flush ~28,000 gallons / ~$100 -- $145 Yes (new model)
1.6 GPF (1994--2010) 1.28 GPF ~5,800 gallons / ~$18 -- $30 Yes (new model)
1.6 GPF 0.9 / 1.0 GPF dual-flush ~9,500 gallons / ~$30 -- $50 Yes (new model)

Swiss Madison and Woodbridge are two brands worth considering for dual-flush buyers seeking modern rectangular aesthetics at a lower price point than TOTO. The Woodbridge T-0001 in particular pairs a skirted one-piece design with 1.28/0.9 GPF dual-flush action and EPA WaterSense certification, at a cost well below comparable TOTO or Kohler models. See our dual flush toilet guide for a full comparison.

Planning Your Bathroom Remodel: A Step-by-Step Framework

Step 1: Define Scope Before Getting Bids

Contractors can only give accurate bids when scope is clear. Create a written list of every element being changed, every element being kept, and any work that might involve structural, electrical, or plumbing permits. Verbal descriptions produce wildly variable bids. Written scope sheets produce comparable bids you can evaluate side by side.

Step 2: Set a Realistic Budget with Contingency

Research national and local cost data (Remodeling Magazine, HomeAdvisor, NKBA) before meeting with contractors. Build in 15 to 20 percent contingency. If your budget is $15,000, plan for $12,000 in scope and hold $2,250 to $3,000 for surprises. This is not pessimism -- it is what seasoned project managers do on every bathroom remodel.

Step 3: Lock in Fixtures Before Demolition Starts

Toilet, vanity, tub or shower base, and faucets should all be ordered and on-site before demo begins. Lead times for specific finishes or models can run 2 to 8 weeks. Waiting causes project delays that cost more in contractor re-scheduling fees than the original shipping cost would have.

Step 4: Verify Rough-In Before Purchasing the Toilet

Measure the distance from the finished wall to the center of the toilet bolt caps. Write it down. The vast majority of US homes have a 12-inch rough-in, but a meaningful percentage -- particularly older homes built before 1960 -- have 10-inch or 14-inch rough-ins. Buying the wrong rough-in size results in a non-returnable problem.

Step 5: Sequence Work to Avoid Rework

Standard remodel sequence: demo, rough plumbing and electrical, waterproofing, cement board, tile (floor first, then walls), paint, vanity, toilet, accessories. Installing the toilet or vanity before tile is complete means moving it again -- or leaving an untiled gap at the base.

Step 6: Get Final Inspections Where Required

Any work that required permits -- typically structural changes, new circuits, and plumbing relocations -- requires a final inspection before closing walls. Skipping this step may create issues during home sale disclosure or homeowner's insurance claims.

Editorial Take

The single variable that most reliably separates on-budget remodels from over-budget ones is how clearly scope was defined before work started. Scope creep -- "while you're in there, could you also..." -- is responsible for more budget overruns than material cost increases or labor rate surprises combined. Every addition mid-project costs more than it would have in the original bid.

Frequently Asked Questions

How long does a bathroom remodel typically take?

A cosmetic-only refresh (no tile, no plumbing relocation) takes 2 to 5 days for a single contractor. A mid-range remodel with tile work and new fixtures takes 1 to 3 weeks. Full gut renovations with structural changes can run 4 to 8 weeks, longer if permits and inspections are required.

Should I replace the toilet during a bathroom remodel?

Yes, in almost every case. If the existing toilet is more than 15 years old, replacing it during the remodel avoids a second disruption later. New toilets also benefit from the fresh wax ring and floor work already being done, and upgrading to a WaterSense model may qualify for utility rebates that offset part of the cost.

What is the most important thing to measure before buying a toilet?

The rough-in distance: from the finished wall to the center of the floor bolt caps. Standard is 12 inches in most US homes, but 10-inch and 14-inch rough-ins exist in older construction. Buying the wrong size creates an expensive, often non-returnable problem.

What is a MaP flush-test score and why does it matter?

MaP (Maximum Performance) testing measures how many grams of simulated waste a toilet can clear in one flush. Scores range from 250g to 1,000g. Anything above 600g is acceptable for light residential use; 800g or above is recommended for families; 1,000g (the maximum) is what the TOTO Drake II and UltraMax II achieve and is considered best-in-class.

Is EPA WaterSense certification important for a bathroom remodel?

Yes, for two practical reasons: it confirms the toilet uses 1.28 GPF or less (reducing water bills), and it is the qualifying criterion for utility rebates in most US municipalities. Many water districts offer $50 to $200 per toilet to encourage replacement of older high-flow models. The EPA WaterSense website lets you search for rebates by zip code.

What is the difference between comfort height and standard height toilets?

Standard height toilet seats sit 14 to 15 inches from the floor. Comfort height (also called ADA height or chair height) seats sit 16.5 to 18 inches from the floor. Most adults find comfort height easier to sit and rise from, particularly for people over 50 or anyone with knee or hip issues. ADA compliance requires a seat height of 17 to 19 inches.

How much does it cost to hire a plumber to install a toilet?

Toilet installation by a licensed plumber typically runs $150 to $350 for a straightforward swap with no rough-in changes. If the shutoff valve needs replacement or the floor flange is damaged, expect $250 to $500. A toilet installed as part of a larger remodel project is usually negotiated as part of the overall labor quote, often reducing the per-fixture cost.

What is the best toilet brand for a bathroom remodel?

TOTO is the most consistently recommended brand among plumbers and independent flush testing data. The Drake II and UltraMax II both achieve 1,000g MaP scores with 1.28 GPF WaterSense certification. Kohler (Cimarron, Highline) and American Standard (Champion 4, Cadet 3) are strong alternatives, particularly for buyers who prioritize North American parts availability and service networks.

Can I do a bathroom remodel without moving the toilet location?

Yes, and it is strongly recommended unless a new layout is necessary. Moving the toilet requires relocating the drain stack, which is one of the most expensive plumbing operations in a bathroom remodel -- often adding $1,500 to $3,500 in labor and materials. Keeping the toilet in place and simply replacing the fixture avoids all of that cost.

What is the best tile for a bathroom remodel floor?

Porcelain tile is the dominant choice for bathroom floors due to its water resistance, durability, and wide format options. For wet areas, look for a Dynamic Coefficient of Friction (DCOF) rating of 0.42 or higher to meet slip resistance standards. Matte and textured finishes generally outperform polished tiles in wet conditions. Ceramic tile is a lower-cost alternative that works well in low-traffic bathrooms.

Does removing a bathtub hurt home resale value?

It can in specific situations. Removing the only bathtub in a home is a known negative for buyers with young children and can reduce appraised value in some markets. In primary bathrooms where a separate soaking tub exists, converting a tub-shower combo to a walk-in shower typically adds value. A real estate professional familiar with your local market is the best source for guidance on this decision.

What exhaust fan CFM rating is right for a bathroom remodel?

HVI (Home Ventilating Institute) recommends 1 CFM per square foot of bathroom area, with a minimum of 50 CFM for bathrooms up to 50 square feet. Bathrooms over 100 square feet should use 110 CFM or higher. Models with humidity sensors run automatically when moisture levels rise, which is more effective than timer-based switches at preventing mold growth.

What is a dual-flush toilet and is it worth it for a remodel?

A dual-flush toilet uses one button for liquid waste (typically 0.8 to 1.0 GPF) and a second for solid waste (1.28 to 1.6 GPF). For households in drought-prone states or areas with high water rates, the additional water savings can justify the slightly higher purchase cost. The TOTO Aquia IV and Woodbridge T-0001 are two well-reviewed options. The main downside is that some dual-flush buttons require stronger activation than traditional trip levers, which can be a consideration for users with limited hand strength.

Should I DIY my bathroom remodel or hire a contractor?

Toilet replacement, painting, vanity swaps, and fixture hardware are within the skill set of most DIYers with basic tools. Tile work, electrical, plumbing rough-in, and waterproofing for shower enclosures involve higher stakes: water damage from improper shower waterproofing can cost $5,000 to $15,000 in remediation. Many homeowners opt for a hybrid approach -- hiring out tile and rough-in work, DIYing toilet installation and painting.

Do I need a permit for a bathroom remodel?

It depends on scope and jurisdiction. Cosmetic work (paint, vanity swap, toilet replacement in the same location) typically does not require permits. Structural changes, adding or relocating electrical circuits, and moving plumbing drains almost always require permits. Building without required permits can complicate home sales and void insurance in some states. Check with your local building department before demo begins.

What is the Gerber Viper toilet and is it good for remodels?

The Gerber Viper is a two-piece elongated toilet with a 1.28 GPF WaterSense certification and MaP scores that typically test at 1000g. It is a solid mid-range option often specified in accessible bathroom remodels due to its comfort-height seat and simple, reliable trip lever. Gerber maintains strong parts availability through plumbing supply houses, which is an advantage for long-term serviceability.

How do I find utility rebates for toilet replacement?

The EEPA WaterSense rebate finder at epa.gov/watersense lets you search by state and zip code for local utility programs that offer cash back for replacing inefficient toilets. Programs vary widely -- some reimburse $50 per toilet, others up to $200. Most require proof of purchase and a photo of the old toilet serial number to confirm pre-1994 or 1.6 GPF status.

What brands make the best one-piece toilets for modern bathroom designs?

TOTO UltraMax II, Woodbridge T-0001, and Swiss Madison Sublime II are frequently cited in design communities for combining clean skirted silhouettes with strong flush performance. All three are available with comfort height seats and WaterSense certification. Swiss Madison in particular has gained traction for its elongated rectangular tank designs at competitive prices.

How do I know if my current toilet is using too much water?

Check the inside of the tank lid -- most toilets manufactured after 1994 have the flush volume stamped there (e.g., "1.6 GPF"). If your toilet was manufactured before 1994, it almost certainly uses 3.5 or 5.0 GPF. You can also dye-test for silent leaks: add food coloring to the tank; if color appears in the bowl within 15 minutes without flushing, the flapper is leaking and can waste 100 to 200 gallons per day.

What is the smallest bathroom footprint that can be legally remodeled into a full bath?

Building codes vary by jurisdiction, but most US residential codes require a minimum of 5 feet by 8 feet (40 square feet) for a full bathroom with tub, toilet, and vanity. Toilet clearance codes typically require 15 inches from toilet centerline to any sidewall or obstruction and 21 to 30 inches of clearance in front of the toilet (21 inches is the minimum, 30 inches preferred). ADA accessible bathrooms require more clearance -- a minimum 60-inch turning radius in the toilet area.

Sources

  • EPA WaterSense, epa.gov/watersense
  • MaP flush testing, map-testing.com
  • National Kitchen and Bath Association (NKBA), nkba.org
  • Remodeling Magazine Cost vs. Value Report 2025-2026, costvsvalue.com
  • Home Ventilating Institute (HVI), hvi.org
  • Manufacturer published specifications -- TOTO, Kohler, American Standard, Woodbridge, Swiss Madison, Gerber
  • International Residential Code (IRC) bathroom clearance requirements, iccsafe.org

Our Verdict

Bathroom remodels deliver meaningful returns when scope matches budget and decisions are data-driven. For most homeowners, a mid-range remodel anchored by a high-MaP toilet (TOTO Drake II or UltraMax II), updated vanity, improved lighting, and quality tile will return 60 to 72 cents on the dollar at resale while creating a meaningfully better daily experience. Skip the toilet upgrade and you leave the most impactful single plumbing decision on the table -- the one that affects flush reliability, water bills, and buyer perception for the next 20 years. Confirm rough-in measurements, verify MaP scores, and check local utility rebates before finalizing any fixture order.

M
Researched by Marcus Bell

Marcus compiles bathroom-fixture data, MaP flush scores, GPF ratings, trapway and flush-valve specs, and weighs them against thousands of verified owner reviews to build our rankings. He does not run physical lab tests; every verdict is sourced from published specifications, certifications (MaP, EPA WaterSense) and real owner feedback.

Updated August 2026 · Bathroom Remodeling
Keep reading

Related guides

Best 30-Inch Bathroom Vanities (2026)

Best 30-Inch Bathroom Vanities (2026)

Bathroom Remodeling
4.6

Thirty inches is the sweet spot between a cramped 24-inch vanity and a full 36-inch cabinet, giving a single-sink bathroom real drawer…

Read the guide
Best Cast Iron Bathtubs (2026)

Best Cast Iron Bathtubs (2026)

Bathroom Remodeling
4.6

Cast iron is the material homeowners choose when heat retention and permanence matter more than installation weight, and Kohler remains the brand…

Read the guide

Common Bathroom Vanities Problems and How to Fix Them (2026)

Bathroom Remodeling
4.6

Step-by-step fixes for the bathroom vanity problems that show up most often, from misaligned drawers and doors to water damage at the…

Read the guide