Woodbridge B0960S Smart Toilet Full Review

What exactly is the Woodbridge B0960S and how does it differ from the standard B-0750?

Woodbridge Bathroom is a California-based brand that entered the North American smart toilet market in the mid-2010s. The company sources vitreous china bodies manufactured to ASME A112.19.2 / CSA B45.1 plumbing standards and pairs them with electronic bidet seats engineered in-house. The resulting product line occupies the space between a standard gravity-flush toilet and a full luxury bidet toilet such as the TOTO Neorest.

The B0960S model designation identifies the second-generation bidet combo with upgraded seat electronics. The "S" suffix in some retail listings denotes the skirted trapway variant -- a fully concealed base that eliminates the exposed S-curve visible on traditional two-piece toilets. This design eliminates grout traps and makes cleaning the base substantially easier.

The toilet body is elongated, which provides approximately 2 more inches of front-to-back seating area compared to a round bowl. This matters for adult comfort during extended bidet wash cycles. The seat height at the rim is 17.5 inches from the finished floor, placing it in the comfort-height (chair-height) range that aligns with ADA recommendations for ease of sitting and standing.

For buyers working through the full best flushing toilets landscape, the B0960S represents Woodbridge's most complete smart toilet offering below the brand's higher-end Ambacht and Regent series.

Does the Woodbridge B0960S pass MaP flush testing and what does the score mean?

MaP scores matter most in households where clogging is a recurring problem -- large families, homes served by low-pressure municipal supply, or properties with aging drain lines that run at shallower slopes. A toilet scoring 1,000 grams gives you the largest safety margin against partial clogs, and it does so without requiring any additional effort from the user.

The B0960S achieves this score through a siphon-jet flush mechanism. Water enters the bowl from both the rim ports and a dedicated siphon jet positioned at the base of the bowl. On a full flush, the jet creates rapid siphonic action that pulls waste down and through the trap. The trapway is fully glazed -- the same surface treatment used by TOTO on their CeFiONtect-coated models -- which reduces particulate adhesion and mineral buildup that could degrade flush performance over time.

The reduced flush cycle at 1.0 GPF delivers a lighter rinse appropriate for liquid waste. Like all dual-flush toilets, including the TOTO Aquia IV and Kohler Cimarron dual-flush, the low-flush cycle is not intended for solid waste and should not be compared to the full-flush MaP score. This is a design choice shared across the category, not a deficiency unique to Woodbridge.

Is the Woodbridge B0960S EPA WaterSense certified and how much water does it actually save?

EPA WaterSense is a voluntary certification program that requires products to use 20 percent less water than the federal standard (1.6 GPF for toilets) while meeting strict performance requirements. A toilet can only carry the WaterSense label if it passes both efficiency testing and independent flush-performance testing -- typically MaP testing -- at a minimum of 350 grams. The B0960S clears that bar by a wide margin at 1,000 grams.

For households in water-restricted municipalities -- California, Arizona, Colorado, parts of Texas -- WaterSense certification is often required for any new toilet installation or renovation permit. The B0960S satisfies these requirements in all 50 states.

What bidet seat features does the Woodbridge B0960S include and how do they compare to aftermarket seats?

The stainless-steel nozzle is a meaningful upgrade over plastic nozzles found on budget bidet seats. Stainless resists mineral deposits and bacterial adhesion better than ABS plastic, and it tolerates the cleaning agent residues that accumulate in hard-water markets. The self-cleaning cycle runs automatically before and after each use, rinsing the nozzle with clean water and retracting it into a protective shield.

Water heating on the B0960S uses a tank-style heater, not a tankless on-demand system. This means the seat maintains a small reservoir of pre-heated water, which can be depleted during extended use. For most users performing a standard wash cycle, the reservoir is adequate. The TOTO C100 and C200 Washlet seats also use tank-style heating at this price tier -- only the TOTO S500e and S550e move to true tankless systems, which are significantly more expensive.

The wireless remote is included in the standard package. Some competing models at similar price points include only a side-mounted control panel, which can be awkward to reach. The remote allows seat adjustments without repositioning, which is important during longer wash and dry cycles.

The soft-close lid and seat operate on hydraulic dampers that prevent slamming. This is standard equipment on the B0960S and performs reliably according to aggregated owner feedback on major retail platforms.

How does the Woodbridge B0960S compare to the TOTO Drake II with C200 Washlet?

The TOTO Drake II (CST454CEFG or CST454CUFG) is one of the most thoroughly documented toilets in the North American market. Its 1,000-gram MaP score has been independently verified dozens of times across multiple lab runs. The flush system uses TOTO's E-Max single-flush technology at 1.28 GPF -- a single-flush system that outperforms many dual-flush designs on solid waste removal per gallon.

Pairing the Drake II with a TOTO C200 Washlet creates a capable but externally-seated bidet setup. The seat attaches via TOTO's SoftClose hinge system and connects to water supply and power independently. The aesthetic result shows a visible gap between the seat and the toilet rim -- a trade-off that is invisible in use but noticeable in photographs. The Woodbridge B0960S eliminates this gap entirely because the seat is designed and built as part of the unit.

For buyers comparing the two at the specification level, the TOTO combination wins on ceramic glaze quality (CeFiONtect vs. Woodbridge's standard glaze), auto-cleaning water chemistry (eWater+ vs. water-only rinse), and brand heritage (TOTO has manufactured toilets in the United States since 1989). The Woodbridge B0960S wins on all-in cost, aesthetic integration, and the convenience of a single-purchase solution.

Buyers researching the best smart toilets or the best flushing smart toilets will find both options appear consistently at the top of curated recommendation lists, with the TOTO pair favored by performance-focused reviewers and the Woodbridge favored by value-oriented buyers.

Woodbridge B0960S Specifications

The following specifications are drawn from Woodbridge's published product documentation and independent testing records:

Installation requirements and common setup issues for the Woodbridge B0960S

The toilet itself can be installed by any licensed plumber or experienced DIYer. The one-piece format means there are no tank-to-bowl connections to seal, and the skirted base sits flat against the floor. The wax ring, closet bolts, and supply line are typically included or widely available at home improvement stores.

The electrical requirement is the primary planning consideration most buyers overlook. The bidet seat's heating element draws up to 1,400 watts at peak, requiring a dedicated circuit. Plugging into a shared bathroom circuit alongside a hair dryer or space heater can trip the breaker. If your bathroom does not already have a GFCI outlet positioned within reach of the toilet, budget for an electrician visit before purchase.

The power cord exits from the rear of the seat toward the wall. Most units include a cord approximately 4 to 5 feet long. If your outlet is further away, avoid extension cords -- Woodbridge's warranty and most electrical codes prohibit them for high-draw appliances. Have the outlet relocated to an appropriate position.

Water pressure requirements: the B0960S bidet function performs best with household water pressure between 20 and 80 PSI, which covers the vast majority of North American municipal supplies. Properties on well water or with older pressure-reducing valves at the lower end of that range may notice reduced spray force on the bidet function.

What do verified owners say about the Woodbridge B0960S after long-term use?

Positive patterns in aggregated owner reviews:

• Flush power is consistently described as strong, with very few reports of clogs in normal household use
• The skirted base is praised for making bathroom cleaning faster and more thorough
• The heated seat is noted as a comfort improvement that owners quickly come to rely on
• The stainless nozzle holds up well in hard-water markets based on 12-18 month reports
• Soft-close lid function remains smooth across the reported ownership period

Recurring concerns in aggregated owner reviews:

• The wireless remote requires CR2032 batteries that deplete faster than expected by some users (every 2-4 months with heavy use)
• The remote's button layout has a moderate learning curve; some owners printed a reference card for household members
• A small subset of owners in climates with very cold supply water (below 40 degrees F at the pipe) report that the tank heater struggles to deliver the warmest seat temperatures
• The toilet's weight (~102 lbs) makes solo installation challenging and is best handled by two people or a professional
• Some owners note the power cord length is tight in bathrooms where the outlet is positioned lower on the side wall rather than behind the toilet

Woodbridge B0960S vs. Swiss Madison St. Tropez smart toilet

The Swiss Madison St. Tropez and its Chateau-series variants are the most direct style competitors to the Woodbridge B0960S at comparable price points. Both feature skirted one-piece designs, integrated bidet seats, and dual-flush systems. The key differences:

Flush performance: the Woodbridge B0960S holds a published 1,000-gram MaP score; the Swiss Madison St. Tropez does not list a verified MaP score in manufacturer documentation as of June 2026, and independent testing places most Swiss Madison models in the 600-800 gram range. For clog resistance in high-use bathrooms, the Woodbridge holds a verifiable advantage.

Aesthetics: Swiss Madison has invested more heavily in contemporary European styling -- thinner profiles, sharper angular lines, and a slightly smaller footprint. The St. Tropez is marginally more compact and can fit tighter bathroom layouts. The Woodbridge B0960S has a slightly more traditional silhouette that suits transitional and transitional-modern interiors.

Seat features: the two models are closely matched in bidet seat function. Swiss Madison's seat includes comparable wash, dry, and heat options. The Woodbridge edge is the stainless-steel nozzle versus Swiss Madison's plastic nozzle on base-tier St. Tropez models.

Buyers who want a deeper look at this comparison will find it covered in our Woodbridge vs. Swiss Madison comparison guide. For a broader look at the smart toilet category from multiple brands, see our best smart toilets 2026 roundup.

Warranty, parts availability, and long-term support for the Woodbridge B0960S

Woodbridge offers a 5-year manufacturer warranty on the B0960S covering both the ceramic toilet body and the electronic bidet seat components. This is above average for the category -- TOTO's add-on Washlet seats carry a 1-year parts and labor warranty, while Brondell and Bio Bidet typically offer 3 years. The Kohler Veil Intelligent Toilet matches the 1-year electronics coverage on the seat before extending to 5 years on the vitreous china.

Parts availability for the B0960S has improved since initial launch. Replacement stainless nozzles, seat control boards, and remote controls are available through Woodbridge's customer service channel and select third-party parts suppliers. The ceramic body, being ASME-standard vitreous china with a 12-inch rough-in, can be serviced with any standard wax ring, supply line, or closet bolt set from any plumbing supplier.

Woodbridge's customer support contact is domestic (California-based), and warranty claims are handled by direct shipment of replacement parts rather than a tech dispatch system. Response times based on aggregated owner reports average 3-5 business days for initial contact and 7-14 days for part delivery. This is slower than TOTO's dealer-network support model but faster than many direct-import brands.

Who should buy the Woodbridge B0960S and who should look elsewhere?

The B0960S is the right choice if:

• You want a single-unit smart toilet without the extra cost and aesthetic compromise of pairing a bidet seat to a separate toilet body
• Flush reliability at 1,000 grams MaP is a non-negotiable requirement and you want it in a bidet combo
• Your bathroom has or can easily add a GFCI outlet within 4-5 feet of the toilet position
• You are replacing a toilet in a master or primary bathroom where a skirted, modern look justifies the installation weight and cost
• You are budget-conscious relative to TOTO or Kohler smart toilet pricing but still want WaterSense compliance and strong flush performance

Consider alternatives if:

• Your bathroom lacks a nearby electrical outlet and adding one is not feasible -- the bidet features are entirely non-functional without power
• You want TOTO's CeFiONtect ceramic glaze and eWater+ nozzle auto-cleaning, which are proprietary to TOTO and not available on Woodbridge products
• You need a very compact footprint -- the B0960S is not a space-saver; look at the Swiss Madison Ivy or Gerber Maxwell if depth is a constraint
• You are installing in a rental property or high-turnover commercial setting where electronic complexity and tenant misuse create warranty exposure
• You want a toilet body only and prefer to choose your own bidet seat -- the Woodbridge T-0001 or TOTO Drake are better platforms for a separate-seat strategy

For buyers who want a non-smart but high-performance Woodbridge, our Woodbridge T-0001 review covers the brand's flagship gravity-flush model.

Check price on Amazon